MSI Big Bang-Fuzion MS-7582 User Manual page 51

▶ SATA1~10 & IDE Primary Master/ Slave & E-SATA1/ 2
Press <Enter> to enter the sub-menu and the following screen appears:
▶ Device / Vendor / Size (optional)/ Current Mode (for SATA7~10)/ SMART Log (for
SATA7~10)
It will show the device information that you connected to the IDE/ SATA/ ESATA
connector.
Important
SATA1~10 & IDE Primary Master/ Slave & E-SATA1/ 2 are appearing when you con-
nect the HD devices to the IDE/ SATA/ E-SATA connectors on the mainboard.
▶ Hold On
The setting determines whether the system will stop of an error is detected at boot.
When the system stops of the errors preset, it will halt on for 15 seconds and then au-
tomatically resume its operation. Available options are:
[All Error] The system stops when any error is detected.
[No Error] The system doesn't stop for any detected error.
▶ System Information
Press <Enter> to enter the sub-menu, and the following screen appears.
This sub-menu shows the CPU information, BIOS version and memory status of your
system (read only).
MS-7582 MS-7582
3-7