Memory - MSI Big Bang-Fuzion MS-7582 User Manual

Memory

These DIMM slots are used for installing memory modules. For more information on
compatible components, please visit http://www.msi.com/index.php?func=testreport
DDR3
240-pin, 1.5V
Memory Population Rule
Please refer to the following illustrations for memory population rules.
Dual-Channel mode Population Rule
In Dual-Channel mode, the memory modules can transmit and receive data with two
data bus lines simultaneously. Enabling Dual-Channel mode can enhance the system
performance. The following illustrations explain the population rules for Dual-Channel
mode.
1
2
Important
DDR3 memory modules are not interchangeable with DDR2 and the DDR3 standard
•
is not backwards compatible. You should always install DDR3 memory modules in
the DDR3 DIMM slots.
• In Dual-Channel mode, make sure that you install memory modules of the same type
and density in different channel DIMM slots.
• To enable successful system boot-up (Lynnfield CPU especially), always insert the
memory modules into the DIMM1 first.
Due to the chipset resource deployment, the system density will only be detected up
•
to 15+GB (not full 16GB) when each DIMM is installed with a 4GB memory module.
48x2=96 pin 72x2=144 pin
DIMM2
DIMM1
DIMM4
DIMM3
DIMM2
DIMM1
DIMM4
DIMM3
Installed
Empty
MS-7582 MS-7582
2-7