Button
The motherboard provides the following buttons for you to set the computer's function.
This section will explain how to change your motherboard's function through the use
of button.
Clear CMOS Button: CLR_CMOS1
There is a CMOS RAM on board that has a power supply from external battery to keep
the system configuration data. With the CMOS RAM, the system can automatically
boot OS every time it is turned on. If you want to clear the system configuration, use
the button to clear data. Press the button to clear the data.
Important
•
Make sure that you power off the system before clearing CMOS data.
After pressing this button to clear CMOS data in power off (G3) state, the system will
•
boot automatically.
OC Genie Button: OC_Genie
This button is used to auto-overclock for the system. Press this button to enable the
OC Genie function when the system is in power off state, meanwhile, the button will
light and lock. And then the system will automatically detect the optimum values to
overclock after booting the system. To disable the OC Genie function, please press the
button again after power off the system, meanwhile, the button light will off and unlock,
and the system will restore the default for next boot.
Important
•
Please install the DDR3 1333 and up memory and equip better heat sink/ cooler with
OC Genie function.
•
We do not guarantee the OC Genie overclocking range and the damages or risks
caused by the OC Genie overclocking behavior.
You can disable the OC Genie function in BIOS setup. And we suggest you to save
•
the OC Genie configuration to overclocking profile in BIOS for future using.
•
The usage of OC Genie is at your own risk. Overclocking is never guaranteed by
MSI.
MS-7582
MS-7582
2-17