F12] : End Setting - FujiFilm FinePix A400 Service Manual

FinePix A400 Service Manual

4-16 [F12] : End Setting

(Destination setting, USB ID write, Product mode setting)
1. The End setting consist of the following settings.
* Destination setting
* USB ID write
* Product mode setting (mass storage identification)
2. The setting must always be run when the adjustment software is terminated. Failure to run Terminal Setting will prevent
identification as Mass Storage when the camera is connected to the PC.
3. USB ID write details
1) USB ID write requires that the USB device (in this case FinePix A400) be unique throughout the world. For this reason,
each device has a unique ID as determined by the USB standard. If multiple devices with the same USB ID are connected
to a single PC, the PC will be unable to identify each USB device, thus preventing operation.
Item
Repair Date
Administrator ID
Repair Station
Repair Serial No.
Date information is acquired from the PC and written.
01(01)
U.S.A. 61(a)
CANADA 62(b)
HAWAII 63(c)
TAIWAN 64(d)
ENGLAND 66(f)
GERMANY 67(g)
FRANCE 68(h)
SPAIN 69(i)
ITALY 6A(j)
NETHERLANDS 6B(k)
BELGIUM 6C(l)
SWEDEN 6D(m)
SWITZERLAND 6E(n)
NORWAY 6F(o)
FINLAND 70(p)
SINGAPORE 71(q)
CHINA 74(t)
OTHER 7A(z)
A serial No. is assigned automatically and written
4. Adjustments
Details
SAPPORO 30(0)
SENDAI 31(1)
TOKYO 33(3)
NAGOYA 34(4)
OSAKA 35(5)
HIROSHIMA 37(7)
FUKUOKA 38(8)
69