Panasonic WV-SF549 Installation Manual page 21

Installing the camera directly on the ceiling or wall
Place the installation template label (accessory) on the ceiling or wall, and make a hole to pass the
cable.
Remove the template label, and mount the camera by fixing 4 screws (locally procured).
(☞ Page 29)
Installation template label (accessory)
Using the optional ceiling mount bracket WV-Q174
It is possible to reduce the exposed portion of the
camera body using the optional ceiling mount
bracket. Refer to WV-Q174 Operating Instructions
or "Installation" (☞ page 29) for how to mount the
camera.
Using the optional ceiling mount bracket WV-Q105 (E models only)
Refer to WV-Q105 Operating Instructions and "Installation" (☞ page 29) for how to mount the cam-
era in case of using the optional ceiling mount bracket.
Safety wire angle
(WV-Q105 supplied)
Safety wire
(WV-Q105 supplied)
Side cable access hole
Recommended screw (M4: 4 pcs.)
Cable access hole for ceiling/wall
20 mm {13/16 inches}
Roof space
Anchor bolt
Direction marker for installation
Screws
(locally procured)
WV-Q105 (option)
Fixing screw
(4 pcs., WV-Q105 supplied)
Cable tie (accessory)
Camera
SF539 SF538
Ceiling board such
as plaster board
21