-- JT-P560 OWNER’S MANUAL OPERATING INSTRUCTIONS DESCRIPTION 1. Caller ID Speaker Phone 2. English/French/Spanish selectable 3. 90 Incoming Call Memories including Name and Number 4. Built In Phone Book with 45 Memories 5. Enable to Review Last 16 Dial Out Record 6.
1. Insert 3 “AAA” batteries. 2. Connect the phone with the telephone line. 3. Press [SET] to enter setup mode, then: - Use [UP], [DOWN] to select options. - Use [SET] to enter. - Use [DEL] to exit. SELECT LANGUAGE 1.
Page 3
1. Press [SET] to enter. 2. Use [UP], [DOWN] to select the desired ringing melody. 3. Press [SET] to confirm. PHONE BOOK ENTRY 1. Press [SET] to enter. 2. Enter Number by using the dialing keypad. 3. Press [SET] to confirm. 4.
REVIEW DIALED CALLS 1. Use [DIALED] to review the last dial out record, and 2. Press [DIALED] repeatedly to review all records. 3. Use [DEL] to delete a dialed call record. PHONE BOOK REVIEW AND DIAL OUT 1. Press [BOOK] to go to the phone book. 2.
Page 5
If you forget your pin code, do the following: 1. Remove the batteries. 2. Disconnect the unit from the telephone line for 3 hours. The pin code will reset back to the factory code “8888” and all other information such as...
Need help?
Do you have a question about the JT-P560 and is the answer not in the manual?
Questions and answers