Update Firmware - Leopard Imaging USB 3.0 User Manual

5. Firmware Update
1) Re-connect the USB camera.
2) Open "LP_USB3_FirmwareUpdateTool.exe" which is in the
CameraUSB30_x_x.zip package.
3) Click "FW Update" and select the .lif file.
4) Normally the update will complete in around 20 seconds. While the
application is updating firmware, you can see the update status in the
application window. Once the Firmware update is completed, the status will
be updated as "Program Succeeded". Please re-plug the camera before
viewing the streaming.
Note: If the driver installation is not successful or if the Status shows as
"No Camera", please check whether there's a "WestBridge" under
device manager. The driver of "WestBridge" can be downloaded from
the link below and updated manually. After the driver is installed
correctly, please replug the camera and repeat steps 2) to 4
https://www.dropbox.com/s/2tq036z766ct60f/WestBridge_driver.zip
To update the driver manually:
a. right click on "WestBridge" and select Update Driver Software
b. Choose Browse my computer for driver software
c. Click Browse, locate the driver at the downloaded and unzipped folder
(C:\temp\driver\bin\ for example)
d. Click next and complete the installation process.
USB 3.0 Camera User's Guide
18