Maintenance Inspection; Lever To Lock The Handle; Maintenance Of Brushes - Clarke FM-1700HD Operator's Manual

Maintenance Inspection

Return the machine to a Clarke Authorized Service location ev-
ery 12 months for maintenance inspections.

Lever To Lock The Handle

The locking mechanism for the handle can become loose.
Tighten the nut on the end of the cross link bolt. The pressure
of the locking lever is correct when the handle can be adjusted
easily and fastened as needed.

Maintenance Of Brushes

Always remove the brush from the machine when not in use.
Keep brushes in a cool, dry location. Heat can damage the
wood and the bristles. Scrub brushes with bassine fi bers must
be put in water for 16 hours to replace moisture and give the
bristles a longer life.
Page 18 Clarke ® Operator's Manual FM-1700HD HDTR