Table of Contents
Advertisement
Message
Cannot combine.
Select only movies and combine them.
Deselect PHOTO
scenes.
Cannot combine. Select
Select a range of at least 2 scenes to be combined, and then
multiple scenes.
combine them.
Cannot delete scenes.
This may occur when scene that was edited for division, etc. is to
be deleted.
Combine the divided scenes, and then delete them.
Cannot divide scene.
This message will appear when the scene is extremely short
because division, etc. was repeated.
Cannot execute.
This message will appear if you attempt to combine or move
Change display
scenes with "Category: VIDEO or PHOTO" specified.
category to ALL.
Cannot execute.
Division or change in thumbnail was executed when multiple
Unselect multiple
scenes were selected.
scenes.
Cannot read disc.
Error occurred while the disc was being recognized. Make sure
Check dirt/crack/both-
that there is no scratch or dirt on disc, that the surface/back of
sides contrary/inserted
disc is not reversed, and that the disc is firmly pushed against the
correctly.
turntable. See *3 and *4 on page 138 for troubleshooting.
CANNOT RECORD
• This message will appear when the PHOTO button is pressed
PHOTOS
with the power switch set to " ".
• You cannot record still image on DVD-RW/DVD-R/+RW disc
(recordable of still images from PC). Use DVD-RAM disc to
record still images.
CANNOT RECORD
This message will appear when the REC button is pressed with
VIDEO
the power switch set to " " or " ".
Cannot replace
The thumbnail of a still cannot be changed.
thumbnail on PHOTO
Select a movie.
scenes.
Cannot select any more
The maximum number of selectable scenes is 999.
scenes.
CANNOT SLEEP
The DVD video camera/recorder can enter the sleep/restart
MODE
status only from the recording pause status. The following
conditions apply:
• No disc or card is loaded.
• The disc or card has no remaining space.
• The power switch is set to " " with a DVD-RW (VF-mode)/
DVD-R/+RW.
CARD ALMOST FULL
Remaining space is only enough to record less than 10 stills.
Delete unnecessary stills and try the card, or use another card.
Card error has
• The card terminals may be dirty: Wipe off dirt, and try the card
occurred.
again, or use another card.
• Data other than still image may be included: Use another card.
Card error has
Was the card formatted on PC? Was formatting interrupted
occurred.
midway? When using the card on this DVD video camera/
Format the card now?
recorder, choose "YES" and format it.
Cause & Troubleshooting
Reference
page
80
80
78, 80
79
103
74
9, 37
22, 151
41
83
86
42
78, 99, 152
24
98
133
Advertisement
Table of Contents
