Table of Contents
Advertisement
Message
Scenes over limit.
The number of scenes entered in play list has reached the limit
Cannot add scenes.
that can be entered.
Delete several scenes.
Scenes over limit.
The number of entered scenes has reached the limit that can be
Cannot divide scene.
entered.
Delete several scenes.
Stop processing
The
There was no scene
This message will appear if you try to delete multiple scenes on
which can be deleted.
Disc Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
The disc is finalized.
This message will appear if you press the FINALIZE button with a
Finalize is not required.
finalized DVD-RW/DVD-R/+RW loaded in this DVD video camera/
recorder. Finalizing the disc is not necessary.
This disc cannot be
A disc that cannot be used on this DVD video camera/recorder
used. Please replace
has been loaded. Check the type of disc.
disc.
This disc is recorded by
This DVD video camera/recorder can use only discs recorded on
the NTSC system.
the PAL system. A disc recorded on the NTSC system cannot be
Please replace disc.
used on this DVD video camera/recorder.
UNFORMAT DISC
The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc on this DVD
video camera/recorder before using it.
Reinitializing even a disc used on this DVD video camera/
recorder may be necessary (initializing will erase all recorded
contents on disc). If this message appears, try to initialize the
disc. If the same message still appears, the disc may be
damaged: Use another disc.
See *2 on page 138.
Use AC adapter/
Finalization is not possible when the DVD video camera/recorder
charger.
is powered by a battery: Use the AC adapter/charger for
finalization.
Use AC adapter/
Scene cannot be repaired when the DVD video camera/recorder
charger.
is powered by a battery.
Turn off power.
If the AC adapter/charger is unavailable in handy place, remove
the disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/charger.
Write protected.
A card with the erase prevention switch locked is inserted: Unlock
Check card.
the switch.
Write protected.
• A write-protected disc is inserted.
Check disc.
• Release the write-protect using the Disc Navigation menu.
*1
• This message may also appear when dirt adheres to disc. If this message appears when a recorded
disc is recognized immediately after it is inserted, do not repair the disc; remove it and then use
the provided disc cleaning cloth to clean off the dirt before using it.
• This message may also appear when condensation occurs. In this case, do not repair the disc; turn
the DVD video camera/recorder off, wait until it dries out, and then turn it on again.
Cause & Troubleshooting
button was pressed to stop processing of multiple scenes.
Reference
page
91, 95
91, 95
—
78, 85
101
24
—
98
9
25, 101
25
24
99
137
Advertisement
Table of Contents
