Hitachi DZ-GX3300E(SW) Instruction Manual page 135

Message
Disc error has occurred. Disc error could have occurred during editing of scenes.
Keep disc inside & Turn off the DVD video camera/recorder with the disc being used
restart. in it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
Disc error has occurred. This message will appear when disc error occurred during
Unfinalizing is not unfinalization, and unfinalizing disc failed. Replace the disc.
complete.
Disc error has occurred. • Use another disc.
• See *3 and *4 on page 138.
• Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/
recorder.
Initialize the disc or use another disc.
• Initializing the disc will erase all data on it.
Disc full. Cannot Delete unnecessary scenes before using this disc, or use another
execute. disc.
Disc has no data. This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
Disc has no PlayList. Switching of play list was selected with no play list stored.
Disc includes protected The disc may be software protected from a device other than this
scenes. Delete scenes? DVD video camera/recorder. To release this case, use a device
that has executed software-protect.
Disc is full. Cannot add The number of entered scenes has reached the limit that can be
control info. entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
Disc is not formatted. • Has the disc been initialized on a PC?
Format the disc now? Choose "YES" and initialize the disc when using it on this DVD
video camera/recorder. Initialization will delete all data on the
disc.
• See *2 on page 138.
Disc must be finalized • This message will appear if you remove a DVD-RW (VF-mode)/
before it can be played DVD-R that has not been finalized from the DVD video camera/
back on DVD player or recorder.
DVD recorder. • See *5 on page 138
Drive overheat. Please The temperature inside the DVD video camera/recorder is too
retry later. high, and reading or writing of the data on disc may not be
performed normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video
camera/recorder is placed in a well-ventilated spot.
DVD-R* Disc, 16:9 With DVD-RW (VF-mode)/DVD-R/+RW disc, the setting of 16:9
mode cannot be mode will not be possible when the Video mode is STD.
changed, when Video * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode),
"+RW" will appear when using a +RW.
mode is STD.
DVD-R* Disc, Input Once a DVD-RW (VF-mode)/DVD-R disc has been recorded in
Source cannot be the 16:9 mode, the input source will not be changeable.
changed. * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode).
Cause & Troubleshooting
Reference
page
25
102
9, 23
98
78
—
92
—
78, 80
98
107
30
62
62
135