5. Initialising / partitioning and formatting with
Windows
To initialize the HS128 / HS256 with Windows follow these Steps:
- Enter disk management. To do this right-click on my computer and then click
on manage. In Windows Vista or 7 click start, then right-click on my computer,
choose manage and then click on Disk management from the list.
Here you will find an overview of the different drives:
- After successfully initialising the HS128 / HS256 it will be in the bottom area of
the disk management software:
- If the disk management is open the first time since the HS128 / HS256 was
started following window will pop-up:
52