Permitted Number Of Failed Attempts For Entering The User Pin; Formatting - Digittrade KOBRA STICK User Manual

If the process was successful, the main key flashes green briefly and the KOBRA Stick
switches back to the wait mode.
The quick-out function allows you to log off quickly. It is executed by double-clicking the
"×" key within 2 seconds
5.8 Permitted number of failed attempts for entering
the user PIN
The original factory settings allow the user to make 8 failed attempts to enter the
user PIN. The administrator can change this number to 1 to 16 failed attempts. After
exceeding the specified number, the KOBRA Stick automatically deletes the old crypto
keys, generates new crypto keys and resets the user PIN to the factory settings.
All available data is permanently destroyed.
1) Make sure that you are in menu mode. (The main key lights up blue and the other
keys white.)
2) Press the "0" key, then press "√". The main key flashes purple and all other keys
remain active.
3) Enter the admin PIN and confirm with "√".
4) Enter a number between 1 and 16 and confirm with "√".
If the process was successful, the main key flashes green briefly and the KOBRA Stick
switches back to wait mode.
Note:
The reduction of permitted failed attempts is valid immediately. An increase of permitted
attempts only becomes effective after the user PIN has been successfully entered, even
if this entry is made for the first time after the stick has been reset to the factory settings.

6. Formatting

The KOBRA Stick comes with a FAT32 file system as standard. This format can be
read and written by almost all operating systems (Windows, Mac OS and Linux). The
maximum file size in this format is up to 4GB and is therefore sufficient for most content.
The user can reformat the KOBRA Stick according to the application scenario. For
Windows users, it is recommended to use NTFS, for example. HFS+ is the most powerful
file system for Mac OS X and EXT4 can be used for Linux.
16