3. Getting started with the HS128 / HS256
The necessary power supply for the HS128 / HS256 is provided by USB
or FireWire. An extra power supply is usually not needed. If the cable you
are using does not provide enough power an optional DIGITTRADE power
supply can be purchased.
After correctly connecting the HS128 / HS256 to the computer the Status-
LED will shortly light up „ACTIVE", „STATUS" and „ERROR" in turn.
After which your DIGITTRADE HS128 / HS256 is operational yet it still has
to be unlocked. Have your smart card and smart card PIN ready.
Note: For security reasons only use original accessories with your
DIGITTRADE HS128 / HS256.
3.1 Inserting the smart card
After the DIGITTRADE HS128 / HS256 is operational it has to be unlocked
for use.
To accomplish this insert your smart card (paying attention to the direction
of the arrow) in the Harddrive.
If a valid smart card is insert-
ed the „STATUS"-LED will
flash once. Followed by the
number pad lighting up and
ready for the input of your
PIN.
If an invalid smart card is in-
serted the „ERROR"-LED il-
luminates.
47