Introduction To The Projector; Congratulations On Your Purchase Of The Projector; Features You'll Enjoy - NEC NP610 User Manual

 Introduction to the Projector

This section introduces you to your new projector and describes the features and controls.

Congratulations on Your Purchase of the Projector

This projector is one of the very best projectors available today. The projector enables you to project precise images
up to 300 inches (110 inches on NP610S; 104 inches on NP510WS) across (measured diagonally) from your PC or
Macintosh computer (desktop or notebook), VCR, DVD player, or document camera.
You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen,
and the projector can be permanently mounted on a ceiling*
* Do not attempt to mount the projector on a ceiling yourself.
1
The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk
of bodily injury.
In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance
with any local building codes. Please consult your dealer for more information.

Features you'll enjoy:

• Quick start & Quick Power Off
Less than 4 seconds* after turning on the power, the projector is ready to display PC or video images.
* The quick start time is only when [STANDBY MODE] is set to [NORMAL] in the on-screen message.
The projector can be put away immediately after the projector is powered down. No cool down period is required
after the projector is turned off from the remote control or cabinet control panel.
• Direct Power Off
The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even when
projecting an image) by using the Main Power Switch or disconnecting the AC power supply.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.
• Less than 1W in standby condition with energy saving technology
Selecting [POWER-SAVING] for [STANDBY MODE] from the menu can put the projector in power-saving mode
that consumes only 0.6W (100-130V AC)/0.7W (200-240V AC).
• Carbon Meter
This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector's [ECO
MODE] is set to [ON].
The amount of CO2 emission reduction will be displayed in the confirmation message at the time of power-off and
in the INFO of the on-screen menu.
• 7W built-in speaker for an integrated audio solution
Powerful 7 watt speaker provides volume need for large rooms.
• Virtual Remote function
The Virtual Remote function allows power On/Off and source selection of the projector from your PC by using the
supplied VGA signal cable. The utility software "Virtual Remote Tool" exclusively for the projector is required to be
installed from the accompanying NEC Projector CD-ROM onto your computer.
An accompanying NEC Projector CD-ROM includes the utility software "Virtual Remote Tool" exclusively for the
projector and user's manuals in PDF format.
• Short throw distances (NP610S/NP510WS)
Short focal lenses provide for a larger image using a shorter throw distance when compared to a typical projector
lens.
. The remote control can be used wirelessly.
1
2
1. Introduction