Page 1
PORTABLE CD PLAYER with MP3 DIGITAL RADIO CASSETTE RECORDER MODEL JX-CD492 OWNER’S MANUAL Visit our Web Site: http://www.jwin.com...
Page 2
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: To avoid electric shock, this unit must not be exposed to dripping or splashing water Minimum distances around the apparatus for sufficient ventilation; The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus;...
LOCATION OF CONTROLS TOP VIEW 1. DBBS ON/OFF Button 2. FM Antenna 3. Handle 4. CD Door 5. Cassette Control Buttons (PAUSE/STOP- EJECT/FFW/REW/PLAY/RECORD) 6. CD Door Open Lid 7. Volume Control 8. FUNCTION Selector (TAPE -“CD/Radio Off” /RADIO/CD) 9. FM STEREO/MONO Selector FRONT VIEW 10.
OPERATING INSTRUCTION POWER ON/OFF To turn on the power, slide the FUNCTION selector (8) to your desired mode (RADIO, CD or TAPE with Play button pressed). To turn off the power, slide the FUNCTION selector (8) to TAPE position. BASIC OPERATION Volume Control Once the required station has been located, adjust the VOLUME controls (7) to the desired level.
LISTENING TO THE RADIO Set the FUNCTION selector (8) to RADIO mode RADIO TAPE (CD / RADIO OFF) 2. Press the BAND button (13) or (32) for AM or FM band. Example : FM mode 3. Press the TUNING Up or Down button (14)/(17) or (30)/(31) to tune to the desired station.
PLAYING COMPACT DISCS Set the FUNCTION selector (8) to CD mode RADIO TAPE (CD / RADIO OFF) If there is no CD inside or disc damaged, a "- - -" display will be appear. When there is no disc Loading a disc Lift the CD door lid (6) to open the CD door.
Skip and Search Function Press the SKIP Next or Back buttons (14)/(17) or (30)/(31) briefly. SKIP/ SKIP/ TUN DN TUN UP IN PLAY MODE PRESS ONCE B A C K T O T H E B E G I N N I N G O F T H E C U R R E N T TRACK NEXT TRACK...
PROGRAMMED PLAYBACK This CD player enables you to program up to 20 tracks in the sequence of your choice. First select CD stop mode. 1. Press the PROGRAM button (21) or (27) one time. (“MEMORY” flashes) PROGRAM 2. Press the SKIP Forward or Backward button (14)/(17) or (30)/(31) to select the desired track to be programmed.
PLAYING MP3 DISCS Set the FUNCTION selector (8) to CD mode RADIO TAPE (CD / RADIO OFF) If there is no disc inside or disc damaged, a "- - -" display will be appear. When there is no disc Loading a disc Lift up the CD door lid (6) to open the CD door.
Page 12
To stop the disc playing Press STOP button (13) or (32). Stop condition (TOC display) STOP/BAND PLAY MODE for Repeat Track/Folder and Random Play Operation 1. Press the PLAY MODE button (29) on the remote control once for current track repeat. PLAY/ MODE 2.
Page 13
4. Press the PROG./MEM. button again, then track 4 of folder 3 is stored. PROGRAM 5. Continue to program, repeat steps 2 to 4 for each selection. When Program is full Reviewing programs Press the PROG./MEM. button (21) or (27) repeatedly.
Page 14
PLAYING CASSETTE TAPE Set the FUNCTION selector (8) to TAPE mode RADIO TAPE 2. Press STOP/EJECT button (5) to open the cassette door. Insert a prerecorded tape to the cassette compartment, close the cassette door. To suspend playback Press PAUSE button (5). To resume playback, press the PAUSE button again.
Page 15
COMPACT DISC CARE Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers etc., to the disc label. Clean the disc periodically with soft, lint-free, dry cloth.
TROUBLESHOOTING GUIDE Should this unit exhibit a problem, check the following before seeking service. Symptom Radio Noise or sound distorted on AM or Station not tuned properly for AM or FM FM broadcasts. FM : Antenna is not extended. AM : Unit is not positioned correctly.
Need help?
Do you have a question about the JX JX-CD492 JX-CD492 and is the answer not in the manual?
Questions and answers