Table of Contents
Advertisement
9.3. WDS Repeater
Use this feature to link multiple APs in a network, All clients associated with any APs can
communicate each other like an ad-hoc mode.
Client
Client
Please refer to the previous section to check Access point's configuration.
WDS Bridge
Step1
Step2
Step3
Step4
Step5
Step6
Step7
Step8
Caution: Each WDS bridge's device must use the same Subnet, Wireless Mode, Wireless
Channel, and Security Setting.
5GHz
192.168.1.1
ECB7510
WDS 2.4GHz
5GHz
Client
Login to the web-based configuration interface with default IP
192.168.1.1
Select a Radio to change Operation Mode to WDS from System
-> Operation Mode.
Select 802.11a/b/g/n as your wireless mode.
Select channel you would like to use.
Setup the authentication settings
Setup WDS Link Settings.
Specify the AP's MAC address you would like to connect with.
Press Apply to process all the configurations.
5GHz
192.168.1.2
ECB7510
5GHz
Client
Client
Client
46
Advertisement
Table of Contents
