Client Bridge - EnGenius ECB7510 User Manual

Dual band concurrent ap (ieee 802.11 a/b/g/n)

Hide thumbs Also See for ECB7510:

Table of Contents

9.2. Client Bridge

Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP

Router to join the network.

192.168.1.10

Client

Please refer to the previous section to check Access point's configuration.

Client Bridge

Step1

Step2

Step3

Step4

Step5

Step6

Step7

Note: Client Bridge's IP setting must match to the Access Point's subnet.

192.168.1.1

ECB7510

192.168.1.1

Select a Radio to change Operation Mode to Client Bridge(CB)

from System -> Operation Mode.

Select 802.11a/b/g/n as your wireless mode.

Use site survey to scan Access Points that are available in nearby

area.

Select the AP you would like to associate with.

Setup the authentication settings that match to the Access Point's

setting.

Press Apply to process all the configurations.

192.168.1.2

Access Point /

Wireless Router

Internet

Table of Contents