Wds Mode; Repeater - EnGenius ECB7510 User Manual

4.3. WDS mode

ECB7510 is a Dual Band Concurrent Access Point. It can operate the Access Point mode and
WDS mode at the same time. Therefore, the two operate can be combined as the WDS
repeater mode. It can have Repeater's ability and it also has the Access Point's capabilities.
Connect to any of the Access Point via WDS radio and share the same network with Access
Point's radio. WDS links support up to 4 different WDS networks.
The following example shows an WDS network that uses 2.4GHz as backbone and 5GHz for
wireless client access. A WDS AP is set in the center while the other 4 are configured as WDS
STA (station).

4.4. Repeater

In the Repeater Mode, ECB7510 can extend the wireless coverage area of another Access
Point or Wireless Router. Access Point or Wireless Router must within the range so ECB7510
can associate with it by using the same SSID, Security Password and Channel.
Access Point /
Wireless Router
ECB7510
Client
Client
Client
19