Kyocera Mita FS-1000+ Installation Manual page 19

Ifs10ep-jp.book Page 17 Friday, December 22, 2000 4:27 PM
Front Cover
Process Unit
2
Open the printer's front cover.
3
Lift the process unit together with the
toner container out of the printer.
4
Remove the jammed paper.
When pulling the paper, pull
gently so as not to tear it. Torn
pieces of paper are difficult to
remove and may be easily over-
looked, preventing recovery
from the jam.
5
Replace the process unit and toner con-
tainer, then close the printer.
17
Go to next page