Explanation Of Symbols; Acceptable Risk - Sanoclav KL Operating Instructions Manual

7. The autoclave is heated up to the entered setpoint tem-
perature. A flashing dot at the bottom right-hand side of the
display indicates when the sterilization time has started.
CAUTION: Renewed depression of the "F" key will abort the
process.
8. The heating system is switched off when the sterilization
time has elapsed, and the autoclave cools down. been The
cooling down process can be accelerated when solids have
sterilized by slightly opening the exhaust steam valve
(WARNING: Not with liquids ⇒The autoclave is heated up
to the entered setpoint tem delayed boiling!).When the dis-
play shows ENDE the sterilization is ready. When you press
the button F the display shows the chamber temperature
again.
__________________________________________________
page 25

1.1 Explanation of symbols

DANGER: This symbol draws attention to a dan-
gerous electrical voltage. Non-observance through
direct or indirect contact can result in serious injury
and even death!
WARNING: This symbol draws attention to a dan-
gerous situation (location). Before the device is op-
erated it is imperative that these operating instruc-
tions are read and understood completely.

1.2 Acceptable risk

DANGER:
1. Removal of the control housing gives rise to the
danger of direct contact with live parts of the de-
vice.
2. Only qualified personnel are allowed to open the
control housing when the device is disconnected.
3. The autoclaves with electrical heater must only be
connected to an earthed, shock-proof socket con-
forming with the requisite safety requirements.
__________________________________________________
page 2