Table of Contents
Advertisement
SETUP>>Advanced Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
SETUP>>Advanced menu. Press the cursor ▲▼ button to move up and down in the
SETUP>>Advanced menu.
I
TEM
Audio
Lamp
HDMI
High Altitude Mode
Test Pattern
Closed Caption
LED Control
Presentation Timer
Low Power Mode
Reset All
Press the ENTER button to enter the Audio sub menu.
See Audio on page 34.
Press the ENTER button to enter the Lamp sub menu. See Lamp on page 34.
Press the ENTER button to enter the HDMI sub menu. See HDMI on page 35.
Press the cursor ◄► buttons to turn on or off High Altitude Mode.
Recommended to turn on when the altitude of the environment is higher than 1500m (4921ft).
Press the cursor ◄► buttons to turn on or off the grid test pattern.
Press the ENTER button to enter the Closed Caption sub menu.
See Closed Caption on page 35.
Press the cursor ◄► buttons to select the LED control.
Select Normal for normal LED display and Off to disable LED display.
Press
(Enter) / ► to the Presentation Timer menu. See Presentation Timer on page 36.
Press the cursor ◄► buttons to set Low Power Mode whether is on or off. When Low Power
Mode set to off, it means VGA output port can output signal on power down status.
Press the ENTER button to enter reset all settings to default values.
DLP Projector – User's Manual
D
ESCRIPTION
– 33 –
Advertisement
Table of Contents
