Advertisement
JABLOTRON 100
KEYPAD WITH LCD - Main menu
A user or the system administrator can do partial diagnostics using this keypad or make some small changes
to the system settings.
Press ENTER. The display shows you the Main menu . Using buttons or select
Main menu
the desired option. Confi rm your selection by pressing the ENTER button. Then authori-
sation will be requested. Do the authorisation using your access code or an RFID card
/ tag. The selected option can be changed according to your restriction level. Leave the
main menu by pressing the ESC button or let it be terminated automatically after the 5
minute time-out.
Press ENTER. The display shows you the Main menu . Using buttons or
Clear alarm
select Clear alarm memory indication and confi rm your selection by pressing
memory
ENTER. Authorise yourself. The alarm memory will be cleared in all sections for which
indication
you have access. Stop the activity by pressing ESC.
Press ENTER. The display shows you the Main menu . Using buttons or select
Section
Section control and confi rm your selection by pressing ENTER. Authorise yourself.
control
By pressing buttons or select the section and by pressing ENTER the selected
section will be set. By repeated selection it is possible to set more sections. When
partial setting is allowed, press ENTER once to set the section partially, press ENTER
again to set fully. The set system status is shown on the display by the highlighted
numbers of particular sections. A non highlighted section is an unset section, an unfi lled
square around the number = partially set, a fi lled square around the number = fully set.
An exit delay or setting is executed immediately by selecting the section. By the same
procedure it is possible to perform unsetting. The section control menu is terminated by
pressing the ESC button (repeatedly).
Press ENTER. The display shows you the Main menu . Using buttons or select
Event
Event memory and confi rm your selection by pressing ENTER. Authorise your-
memory
self. By pressing buttons or you can read the basic list of the event memory.
In the upper status bar the time when the event occurred is visible. By pressing
ENTER on a selected event it shows a detailed log. In this detailed listing, use buttons
or to scroll through the details of other events. Terminate the event memory menu
by pressing the ESC button (repeatedly).
Press ENTER. The display shows you the Main menu . Using buttons or select
Active
Active detectors and confi rm your selection by pressing ENTER. The LCD display
detectors
shows you a list of detectors which were active at the moment of pressing the ENTER
button. By pressing buttons or you can scroll through this list. The list shows you
the section to which the detector has been enrolled, its position and the name of the
detector. Terminate the active detectors menu by pressing the ESC button (repeatedly).
Press ENTER. The display shows you the Main menu . Using buttons or
Bypassed
select Bypassed detectors and confi rm your selection by pressing ENTER. The
detectors
LCD display shows you a list of detectors which were bypassed at the moment of
pressing the ENTER button. By pressing buttons or you can scroll through
this list. The list shows you the section to which the detector has been enrolled, its
position and the name of the detector. The system does not react to bypassed
detectors at all. (Turning the detector's bypassing on and off can only be done by
a User with Admin authorization via the Settings menu). Terminate the Bypassed
detectors menu by pressing the ESC button (repeatedly).
Press ENTER. The display shows you the Main menu . Using buttons or select
RF detectors
RF detectors without response and confi rm your selection by pressing ENTER.
without
The LCD display shows you a list of detectors from which the system has repeatedly not
response
received periodical transmissions. By pressing buttons or you can scroll through the
list. The list shows you the section to which the detector has been enrolled, its position
and the name of the detector. To fi x this problem, contact your installer. Terminate the
RF detectors without response menu by pressing the ESC button (repeatedly).
User manual
2)
Advertisement
