Advertisement
JABLOTRON 100
The system also indicates that there was an alarm while you were away in the same way. In such an event be
wary while inspecting the building or wait until the security agency response team arrives.
The segment keeps indicating the alarm memory until it is set again. The indication can also be terminated
by repeating the procedure above. Clearing this indication is possible on the internal menu of the LCD keypad.
Main menu – Clear alarm memory indication .
OTHER MEANS OF CONTROL
- with a keyfob, by telephone and via the Internet
Using a keyfob
The button function is shown by the lock symbols. A closed lock button sets
the alarm while an open lock button unsets it. Concurrent pressing of both buttons
sends a panic alarm signal.
The buttons can be blocked against unintentional pressing (child lock). For
more information see the keyfob manual.
Using the voice menu
The alarm can also be controlled using a mobile phone voice menu which gui-
des you through the selection of functions. When you enter the menu, the fi rst
thing you are informed about is the alarm status. If voice menu access is enabled
for all telephone numbers, you are required to enter a code (on the phone keypad).
Another possibility is enabling access from authorized telephone numbers only (the
telephone contacts stored in the alarm memory).
When an alarm is triggered, the system informs you with a voice message
Using SMSes and dialling-in
SMS commands can be used to control various devices – heating, sunblinds,
etc. in the same way as segments. The SMS text form is CODE COMMAND.
Command wording can be set according to the actual situation, e.g. SUNBLINDS
DOWN. It can be set that no code is required before the command. You can also
enable control by dialling-in from an authorized number. If preset then such a call
is rejected by the control panel, therefore it can be free of charge and the preset
command is automatically executed.
If there is an alarm, the system can send you an informative SMS
Via the Internet
The alarm can also be controlled via the Internet using the web SELF SERVICE
interface which is accessible from www.jablonet.net. To be able to use this web
service previous one-time control panel registration is required. Please ask your
installer for more details.
User manual
3)
.
3)
.
Advertisement
