During An Active Call; Mute; Call Hold - Yealink SIP-T28P User Manual

Enterprise IP Phone
To configure Call Forward via Web interface:
Choose Phone->Features->Forward to do the relation changes. Please refer to
the above configuration information.

During an Active Call

Mute

This function allows you to mute the microphone of the active audio device during a call;
you can not be heard by the other party. You can still hear all other parties while mute
is enabled.
To mute/unmute the conversation:
Press Mute button during a conversation, icon
to get the microphone return to normal conversation.

Call Hold

This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call:
1) Press the Hold button or Hold softkey to put your active call on hold.
2) If there is only one call on hold, press the Resume softkey or Hold button to retrieve
the call.
3) If there are more than one call on hold, press the line button, press the Up/Down
button to highlight the call, press the Resume softkey or Hold button to retrieve the
call.
Using the Basic Call Functions
will be shown in the LCD. Press it again
- 25 -