Display Mode - Brother QL-650TD User Manual

Name of template
[P07]Msg+D+T
[P08]Msg+Num
When a template is downloaded from a PC, the screen is displayed as shown below.
•
[D01] Sample1
•
[D02] Sample2
2.Printing a label
Printing only one label
1
Press the Print button while in Time

Display mode.

The contents of the template are printed.
For a preset template, the content of the label
is automatically adjusted for the size of the DK
Roll.
If the content does not fit within the print range
even if the font size is reduced, an error will
occur.
Specifying the number (quantity) of labels to be printed
1
Press and hold down the Print button.
The screen shown right is displayed, and the number
(quantity) increases.
2
When the quantity to be printed is
displayed (1-999), release the Print
button.
The number of labels displayed when the Print
button is released will be printed.
It is also possible to select the number of labels to be printed from a menu.
Refer to "Specifying the number (quantity) of prints: Menu 4" on page 37.
Content
Message + date + time
Message + numbering
Sample of printing
Received
2009/1/20
12:34
Received
001
12:34 [P07]
2009/1/20
Printing...
Copies
1
Copies
3
Printing...
33
STEP
1
STEP
2
STEP
3