Brother QL-650TD User Manual page 22

22
STEP1 Before using the printer
Manual Operation Button Functions
Name
ON/OFF button
( )
Print button
Cut button
Feed button
Menu button
Cancel button
OK button
Up/down arrow
button ( /
Turns ON/OFF the printer. The ON/OFF button includes a LED light, which
indicates the printer status. Below are the status LED indications:
LED lamp
Not lit
Lit
Blinks rapidly
Blinks slowly
Turns OFF after
blinking 10 times
Starts printing.
Cuts the printed label. This button is used when "Auto Cut" is set to "OFF".
For details, refer to
•
When using DK Labels (pre-cut labels), feeds the DK Label to the edge of
label.
When pressing this button more than one second, the DK Label is fed to the
next label.
•
When using DK Tape (Continuous tape), feeds DK Tape by 1" (25.4mm).
•
When the DK Roll is not set, this printer enters cleaning mode and the roller
spins by 1/3" (8 mm). When pressing this button for more than one second,
the roller spins by 4" (10 cm).
Switches between Time Display mode and Menu Selection mode
In order to avoid changing the template setting mistakenly, the Menu
button can be locked. For details, refer to
page 42.
Cancels the current setting and returns to the previous mode or screen
Accepts the mode or setting entered
Changes the menu or setting
)
Function
Power is OFF
Power is ON
An error has occurred.
For details on troubleshooting, refer to
"Troubleshooting" in page 54.
The printer is processing information.
A system error has occurred.
Turn the QL-650TD off and then on again.
If this error re-occurs, contact the retail outlet where the
QL-650TD was purchased or contact Brother Customer
Service at 1-877-BROTHER.
"Setting the cut options: Menu 8" in page 40.
Status
"Locking the Menu button" in