Table of Contents
Advertisement
7 RECORDING
7-9 How to Restore Recording After Power Failure
If a power failure occurs during recording, recording will
restart in the same mode as soon as power is restored.
To use this function, set the function menu switch <AUTO
REC> on the VTR mode 1 setting screen to ON.
* If this function menu switch is set to ON and power is
turned off and on again in the Stop mode, the VCR
enters the Record mode automatically. Be careful.
7-10 External Timer Recording
External timer recording can be performed by connecting the SR-9240E/EK to an external timer.
1
Check that a cassette is loaded in the VCR.
* If the cassette's safety tab has been removed,
recording will not take place.
* This function does not work when the Timer Record
mode is engaged.
7-11 Tape End Buzzer
When set to ON, a buzzer sounds when the tape ends
during recording. To set the buzzer sound on, set the
function menu switch <TAPE END BUZZER> to ON.
5
Set the timing for the buzzer with <REC REMAIN> or
<COUNT END>. For details, refer to "Contents of the
Function Menu Switches" on page 21.
5
To stop the buzzer sound, you can set the <TAPE END
BUZZER> function menu switch to OFF, turn off the
power, or press another operation button.
5
During repeat recording and AUTO REW, the buzzer
sounds for about 2 seconds.
VTR MODE 1
(SHARPNESS)
(VIDEO MODE)
AUTO REC
(AUTO REC)
(REC CHECK)
(TAPE END MODE)
(INDEX SEARCH)
(CAMERA SW)
(TAPE END BUZZER)
(WARNING BUZZER)
PRESS (SHIFT, SET)
PRESS (MENU)
VTR mode 1 setting screen
2
Set the function menu switch <AUTO REC> to ON.
Power is supplied from the external timer at the
specified time and recording starts.
VTR MODE 1
(SHARPNESS)
(VIDEO MODE)
(AUTO REC)
(REC CHECK)
(TAPE END MODE)
(INDEX SEARCH)
(CAMERA SW)
TAPE END
(TAPE END BUZZER)
(WARNING BUZZER)
BUZZER
PRESS (SHIFT, SET)
PRESS (MENU)
VTR mode 1 setting screen
NORMAL
AUTO
Set to
ON
MANUAL
ON
REPEAT
OFF
OFF
OFF
OFF
TO
END
NORMAL
AUTO
ON
MANUAL
REPEAT
OFF
OFF
ON
Set to
OFF
ON
TO
END
39
Advertisement
Table of Contents
