Computer. ® HANDJET EBS 250 Printer. Components of the Port- Non-return valves in the ink con- able Printer System tainer and ink system. Guide bayonets in the ink con- A B C D E F See figures tainer. Upper guide roll.
Page 5
BackSpace marker (inserts F1) and end-of- monospaced-text (inserts F2) - red Text edit window Control Program MENU tool bar Printer communication window Transmission and error status window Special register and text Parameter tab window library window EBS Ink-Jet Systeme 20080908#3.0...
TARTING THE ONTROL ROGRAM AND TRANSPORT ....27 ONNECTING THE RINTER WITH A ) ..13 OMPUTER INTERFACE USER SUPPORT .....27 TEXT FILES AND PRINT ROBLEMS WITH UNCTIONING AND PARAMETERS ....... 14 ....27 PERATION OF THE RINTER EBS Ink-Jet Systeme 20080908#3.0...
(i) are used exclusively for EBS-200 series printers or (ii) could be used in EBS-250 series printers but are of little significance for manual printers, will not be described in these Instructions or will be described only briefly.
Protect the printer against dirt, Properties high-frequency heavy dust and excessive mois- devices. ture. Your Ink-Jet printer contains a high- EBS Ink-Jet Systeme is able to frequency transmitter and receiver. When ensure perfect and safe opera- EBS Ink-Jet Systeme 20080908#3.0...
HF energy on humans in your powders. country. Operation in areas of blasting Printer accessories. If you do not use original EBS parts or In order to avoid interference during printer accessories, including batter- blasting (shot firing) the printer should ies or electronic components, the...
® HANDJET EBS 250 printer and RFI Do not recharge the battery until modules that have been put out of it is completely discharged - see service must be separated from do-...
(lines 2 and 3). Make sure Remove the container from pack- there is always the same water ing 10. level in the vessel (line 1). Position the container in relation to the back of the printer so that EBS Ink-Jet Systeme 20080908#3.0...
If the programs on the CD do not Remove the container carefully start running on the computer (b). automatically, start setup.exe from the CD’s main directory. EBS Ink-Jet Systeme 20080908#3.0...
Optimally, place module Starting the Control Program at a certain height, to avoid any Click the EBS printer icon on the obstacles between the printer and control panel or, if there is no module such an icon, start EBS-200.exe...
In other words, each texts as standard. This means that character has the same width. The each letter takes a space proportional beginning of a monospaced piece of to the character width. For example, a EBS Ink-Jet Systeme 20080908#3.0...
Move the cursor to another posi- tion and insert another font- change marker. character insertion mode for Windows® fonts ® excessive-font-size indicator if you use Windows fonts type in characters in this widow EBS Ink-Jet Systeme 20080908#3.0...
(time) field. keys successively. You can change separators in- side the date (time) field by re- placing the existing separators with different characters. You can also remove proportional-text markers. EBS Ink-Jet Systeme 20080908#3.0...
(see below). The following encoding system is used as standard: 1-Sunday, 2-Monday, 3-Tuesday, ... , 7-Saturday). The numbering of weekdays can be changed in the following way: on checking the time on your EBS Ink-Jet Systeme 20080908#3.0...
Double-click the counter in the variable field list. You can change the incre- ment or select the Auto save rameter of the counter. Highlight the counter setting with the mouse. EBS Ink-Jet Systeme 20080908#3.0...
Page 19
The following counter is pressed for xth contents are printed: (simulated by the key in the pro- time gram): 0000 0001 0002 0003 0004 0005 0006 0007 0008 0009 0010 0011 0996 0997 0998 0999 1000 1001 EBS Ink-Jet Systeme 20080908#3.0...
Timing can be synchronised using: • Lower guide roll - set the Impulse generator parameter to Lower roll. The movement of the roll makes the axis of the built-in EBS Ink-Jet Systeme 20080908#3.0...
The program makes it impossible to set Fixed speed parameter unless the the printer EBS-250 Safe mode option in the Tools travels from menu, Preferences submenu unchecked. This limit has been set in order...
0 to 9999 with . The system detects every with- to left) the increment of 1. drawal of the printer automatically and suspends printing. After the printer has returned to its proper position, EBS Ink-Jet Systeme 20080908#3.0...
How to Change a Text File ON/OFF ing. If ink pressure in the ink con- Stored in the Printer tainer is insufficient, a micro Every text file can be changed in two compressor starts to add some ways. EBS Ink-Jet Systeme 20080908#3.0...
Every line of the text can parameter is available in the have all the text elements (such Advance tab sheet after the as variable fields, various fonts, Adv. options box has been etc.) described previously. ticked). EBS Ink-Jet Systeme 20080908#3.0...
Text Library optionally) in the printer memory. In order to save the entire text library Each project can contain any of the to the printer use the command Send text elements described previously and save text library. EBS Ink-Jet Systeme 20080908#3.0...
Switch the printer to print another text by pressing button 3 sec. Print the successive text. You can quick-load the project library from the computer disc to your printer with two successive commands Open project library Send and save text library. EBS Ink-Jet Systeme 20080908#3.0...
Wash the nozzles with wash-up, If the printer remains idle for a if they are covered with dried ink. longer period (over 3 weeks), ink EBS Ink-Jet Systeme 20080908#3.0...
Frequent and long-lasting use of printer’s manufacturer, the rinse function increases ink EBS Ink-Jet Systeme and try to consumption. find the answers to your queries, The printer does not print try asking the question to the manufacturer’s representative,...
Insert connector of power pack to power socket of module connect the power pack to a wall out- let. Technical Parameters Pa ra met er De sc r ipt ion Number of nozzles EBS Ink-Jet Systeme 20080908#3.0...
Page 30
(a charac- ter set defined by the manufacturer), etc. Variable fields (texts whose con- Date and time in any format, expiry date, tents vary dynamically according to incremental or decremental counters. occurrence of a specific event) EBS Ink-Jet Systeme 20080908#3.0...
Page 31
(among others in white, yellow, blue, green, red or black) to be ordered from a catalogue. 110 ml enough to print about 100 000 characters with 7x5 dot matrix or Container capacity about 17 000 characters with 16x10 dot matrix, EBS Ink-Jet Systeme 20080908#3.0...
The following elements are delivered most frequently as part of a typical system: • Packing case to hold all accessories..........1 unit ® • HANDJET EBS 250 Printer ............1 unit • Power pack (24V /1A) with cable ..........1 unit • Ink container................2 units •...
Page 33
Guide rolls on cylinder-shaped elements to support rectilinear printing (along the axle - longitudinally). objects to be labelled surface to be labelled dimensions are given in millimetres The printer in its working position - dimensions (side and front views) EBS Ink-Jet Systeme 20080908#3.0...
Need help?
Do you have a question about the HandJet EBS 250 and is the answer not in the manual?
Questions and answers