Download Print this page

EBS -260 First Steps

EBS-260

First steps

Table of Contents

Need help?

Do you have a question about the EBS-260 and is the answer not in the manual?

Page 1 EBS-260 First steps...
Page 2 Contents • WiFi-connection of the printer • Passwords • Recommended cleaning of nozzle plate More information on: Handjet.com There you can download manuals in different languages and an Offline-editor. EBS-260 / 2...
Page 3 After connection read the IP address of the printer and enter it in the Firefox address bar. Firmware 1.02.24 or higher supports also other browsers, like Chrome, Safari, Opera, IE11, etc. Networks, which were already connected in the past, can be deleted or edited. EBS-260 / 3...
Page 4 If you don’t have any available WiFi networks, but you have a computer with built-in-WiFi, you can turn this to a WiFi hotspot. You can find instructions for that in the internet, e.g. here: http://www.windowscentral.com/how-turn-your-windows-10-pc-wireless-hotspot There is also several free software available for building a hotspot, e.g. VirtualRouter. EBS-260 / 4...
Page 5 Login - Administrator (can be changed): Login - Service (not for customers): ●●●●● Login - EBS (only for EBS-Staff): ●●●●● Recommended cleaning of nozzle plate It is recommended that the outer face of the print head, especially the nozzle plate, and possibly the guide rolls should be washed in order to remove the remnants of ink and dirt after the work has been finished and the printer has been switched off.