Superimpose - JVC Model SR-TS1U Instructions Manual

30
EN
1
4
7
1
MENU
To recall an indication
* The Superimpose mode must be set to "ON".
1 Press OSD.
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and "RECORD/PAUSE" if in the Record
Pause mode, are left displayed on the screen.
2
Press OSD again to clear the display.
The RECORD/PAUSE indication is left displayed on
the screen.
The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for
5 seconds.
Stereo program indication
Second Audio Program indication
Tape position indicator
PLAYBACK AND RECORDING FEATURES (cont.)
OSD
2 3
2
5 6
8 9
0
4
OK
SHUTTLE PLUS
CH 125
THU 12:00 AM
STEREO
SAP
Clock time
B
NORM
HI–FI
Audio mode
indications

Superimpose

This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
You can set it to "ON" or "OFF" for playback and recording
separately. When it is set to "OFF", no indications will appear
on the screen.
JOG
ACCESS MAIN MENU SCREEN
SHATTLE
1
Press MENU.
ACCESS FUNCTION SET 2 SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET 2"
by pressing CH 5 ∞ or SHUTTLE PLUS % fi, then press
OK or SHUTTLE PLUS
ACCESS SUPERIMPOSE SET SCREEN
3
Move the highlight bar
(arrow) to "SUPERIMPOSE
SET" by pressing CH 5 ∞ or
SHUTTLE PLUS % fi, then
press OK or SHUTTLE
#
PLUS .
SELECT SUPERIMPOSE SET MODE
4
Move the highlight bar (arrow) to "IN PLAY MODE" or
"IN RECORD MODE" by pressing CH5 ∞ or SHUTTLE
PLUS % fi , then press OK or SHUTTLE PLUS
"ON" or "OFF":
a– IN PLAY MODE: Default setting is "ON". Select "OFF"
if you do not want the superimposed operational
indications on the screen during playback.
b– IN RECORD MODE: Default setting is "ON".The
RECORD/PAUSE indication will appear and be
recorded if in Recording Pause mode. If you do not
want to record the RECORD/PAUSE indication,
select "OFF".
RETURN TO NORMAL SCREEN
5
Press MENU.
NOTE:
The setting you have made is kept in memory. Even if the VCR
is unplugged or the power failure occurs, it will resume every
time you turn on the VCR. (
RECORD
PAUSE
] SP
+ + +
E
INDEX-1
COUNT –1:23:45
Counter reading
Switchable to the tape
remaining time display
#
.
SUPERIMPOSE SET
= IN PLAY MODE :
IN RECORD MODE :
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
pg. 9)
Operation mode
When the operation mode is changed,
the new mode is displayed — RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
Tape speed indication
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pressed.
INDEX indication
ON
ON
#
to select