Superimpose - JVC HR-J452EN Manual

OSD
••
MENU
3
OK
To recall an indication
1
Press OSD.
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD PAUSE if in the Record
Pause mode, are left displayed on the screen.
2
Press OSD again to clear the display.
The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for 5
Tape position indicator
Video system indicator
1
1 2 3
2
4 5 6
7 8 9
0
4
CH5∞
••
PUSH JOG
seconds.
Clock time

Superimpose

This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH 5 ∞ or PUSH JOG % fi, then press OK or
PUSH JOG # .
SELECT SUPERIMPOSE SET
MODE
3
Move the highlight bar
(arrow) to "SUPERIM-
POSE" by pressing CH 5 ∞
or PUSH JOG % fi, then
press OK or PUSH JOG #
to select the desired mode:
a– Select "ON" if you
want the superimposed
operational indications
on the TV screen.
b– Select "OFF" if you do not want the superimposed
operational indications on the screen.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
● If you engage the Record Pause mode, RECORD PAUSE is
displayed regardless of the Superimpose mode setting.
● If you select a channel on which no signal is received, the
channel number is displayed regardless of the Superimpose
mode setting.
CH 125 RECORD
THU 12:00 PAUSE
] SP
+ + +
B E
INDEX-1
NTSC
COUNT –1:23:45
Counter reading
FUNCTION
AUTO TIMER
=SUPERIMPOSE
AUTO SP = LP TIMER
B.E.S.T.
VIDEO SYSTEM
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Operation mode
When the operation mode is changed,
the new mode is displayed — RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
Tape speed indication
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
INDEX indication
19
EN
OFF
ON
OFF
ON
AUTO