Edit From A Camcorder - JVC Model SR-TS1U Instructions Manual

54
EN
Edit From A
Camcorder
AUDIO IN
Recorder
VIDEO
IN
Audio/Video
cable
(supplied)
VIDEO
OUT
CH
NUMBER "0"
1
MENU
Your VCR
AUDIO
OUT
Camcorder
Player
0
4
OK
SHUTTLE PLUS
You can use a camcorder as the player and your VCR as the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder's VIDEO
OUT and AUDIO OUT connectors and your VCR's
VIDEO IN and AUDIO IN connectors.
If connecting a camcorder with an S-Video output, it is
recommended to use the S-VIDEO connection to
minimize picture degradation while editing.
If connecting to a camcorder with an S-Video Output,
connect the camcorder using the connectors on the
rear of the VCR.
When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
JOG
SHATTLE
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER'S INPUT
MODE
3
Set to "AUX". Press the NUMBER key "0" and/or CH to
select depending on the connector being used – "L-1"
for the rear panel input connectors, or "F-1" for the
front panel input connectors.
If you have connected a camcorder with an S-Video
output, select "L-1".
ACCESS MAIN MENU
SCREEN
4
Press MENU.
ACCESS FUNCTION SET 1
SCREEN
JOG
SHATTLE
5
Press CH 5 ∞ or SHUTTLE PLUS % fi to move the
highlight bar (arrow) to "FUNCTION SET 1", then press
OK or SHUTTLE PLUS
EDITING (cont.)
#
.