In-situ RuggedReader Getting Started Manual page 12

Settings on your RuggedReader
Tap , then tap Settings. You can tap any of the icons on the
Personal, System, or Connections tabs to customize the RuggedReader
settings to your own preferences.
The following features appear in the RuggedReader Pocket PC user
interface, but are non-functional due to the special rugged design:
* Recording/Microphone functions are not available.
* Beam/Infrared communications are not available.
* Backup Battery is not available.
Here are a few settings on the RuggedReader that are worth noting.
Application Buttons
Tap the Personal tab at the bottom. Tap on the Buttons icon. The four
application buttons can be reassigned to your favorite programs.
Input
Tap the Personal tab at the bottom. Tap on the Input icon. You can
change settings related to input panels, such as Block Recognizer,
Keyboard, Letter Recognizer, Recon Keyboard, and Transcriber.
Backlight
Tap the System tab at the bottom. Tap on the Backlight icon. Choose
the settings in the Battery Power, External Power, and Brightness tabs
as needed for your use of the RuggedReader. (The display backlight
has signifi cant impact on battery life.) Tap "OK" to exit.
Memory
Closing Programs still leaves them running in the background. If you
need more resources to run your programs, tap the System tab at the
bottom. Tap on the Memory icon and tap the Running Programs tab
at the bottom. You can stop the individual programs or tap Stop All to
free memory.
Power
Tap the System tab at the bottom. Tap on the Power icon to view
the approximate battery power remaining. Tap the Advanced tab and
choose the settings that work best for you. Tap "OK" to exit.
12