LCD PANEL REMOVAL
Lift up the LCD panel from front cabinet.
Take off each speaker from back cabinet.
Confirm Mounting wall wire is installed when you install
the back cabinet.
KEY SW BOARD REMOVAL
Remove 1 screw (C: 3x14) to take the KEY SW board off.
RC LED BOARD REMOVAL
Rremove 1 screw (C: 3x14) to take the RC LED board off.
ELECTROSTATICALLY SENSITIVE DEVICES
Many solid-state devices (especially Integrated
Circuits) are Electrostatically Sensitive, and, therefore,
require special handling techniques as described
under "Servicing Electrostatically Sensitive Devices,"
on page two in this service literature.
– 7 –
Mounting Wall Wire
RC LED Board
KEY SW Board