Panel Module Removal - Sanyo DP50741 Service Manual

PANEL MODULE REMOVAL

1. Remove the 4 screws (C:4x8) from the Mounting Frames to take the panel module off.
CAUTION:
This PDP TV uses several different kinds of screws. Using the correct screw is necessary to prevent damage.
Lead wires must be redressed to their previous locations after servicing. The Earth sheet and gasket are
provided to prevent interference to other radio and television receivers. The Earth sheet and gasket should
be returned to its previous position after servicing.
C
Mounting Frame
C
– 10 –
C
C