Carrier 53KHET 12 Installation Manual page 16

INSTALLATION ACCESSORIES (Cont.)
11.4 OTHER INSTALLATION ACCESSORIES
Not supplied from the factory but must be used in the installation field to complete installation.
DESCREPTION
Electrical Connection
Cables
‫ـ‬
Wall Sleeve
‫ـ‬
Wall Cap
‫ـ‬
Sealer putty
‫ـ‬
Finishing tape PVC film
‫ـ‬
Vinyl tape
‫ـ‬
Drain hose ID 16-17mm
‫ـ‬
Refrigerant piping lines
‫ـ‬
Pipe insulation
- Refrigerant R22
- Clamps or saddles
To electrically connect the indoor unit, the outdoor unit and circuit
breaker
To fill the gap between the wall hole and the lump of refrigerant piping
lines, electrical connection cables and condensate drain line.
To tie together the refrigerant piping lines, electrical connection cables
and condensate drain line.
To stick pipe insulation.
To remove condensate water, from the indoor unit to the outside.
To connect refrigerant R22 between indoor and outdoor units
To insulate gas and liquid refrigerant piping lines
To adjust refrigerant charge for long refrigerant piping lines
(more than 3 meter)
To secure the lump of refrigerant piping lines, electrical cables and
condensate drain line
14
USAGE