Advertisement
SET YOUR VCR'S CLOCK AND
3
3
TUNER
PLUG & PLAY
The VCR's clock and tuner channels are set automatically when the VCR is plugged into the AC
outlet.
If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually.
(
pg.10 – 14 of the HR-DVS1U's instruction manual)
1
2
Don't press any buttons on the VCR or remote
during auto setup.
3
"AUTO" blinks while the VCR automatically
sets the clock using information provided by
the local PBS channel.
NOTES:
If the time displayed in
(refer to page 11 or 12 of the HR-DVS1U's instruction manual). Auto channel set has already
taken place, and is not affected.
There are some PBS channels that do not transmit clock setting data. If your antenna cable is
properly connected and "– – : – –" is displayed, perform the Manual Clock Set procedure (refer
to page 12 of the HR-DVS1U's instruction manual). Auto channel setting has not yet taken
place, so please also perform the "Set Receivable Channels" procedure (refer to page 13 of the
HR-DVS1U's instruction manual).
Plug the VCR into the
AC outlet.
5
is incorrect, perform the Semi-Auto or Manual Clock Set procedure
4
During auto channel setting, the channel
numbers are displayed as they are scanned and
set. Receivable channels are automatically
assigned to CH buttons, and non-receivable
channels are skipped.
5
When setting is complete, the VCR displays the
current time. You can now use your VCR.
Advertisement
