Table of Contents
Advertisement
C-MOR 6P
1.5
The Display (optional)
The following instructions only apply when you have purchased C-MOR including a display.
1.5.1 Setup IP Address
After the switch-on of C-MOR, the system requires 3-4 minutes until it is ready for use. During this time
the display will not change.
As soon as the system is ready, the display will change every 3 seconds showing current system
information. You can now start with the definition of the IP address.
Please follow the instructions below to define the required IP address:
Press
to enter the main menu. Then use the arrow keys (up/down) to navigate to the menu item >
Network > and select by pressing the key
or
select the menu item >IP > and again select by pressing the key
By using the arrow key you can now choose the number that has to be changed and can increase or
decrease it by using the keys
By pressing the key
Now you can access C-MOR over the defined IP address.
User Manual
Menü
>Network >
or
.
you will leave the menu.
. By using the arrow keys
.
Page 7
Advertisement
Table of Contents
