C-MOR GP User Manual page 38

C-MOR 6P
Over the following link you can access the camera's configuration interface:
The settings there will be directly saved in the camera which might lead to problems accessing the
camera, especially in case of changes of the network configuration. In order to make the camera
accessible for C-MOR again, you have to immediately enter all changes of the IP address, the port or the
"Configuration"
user settings into the C-MOR web interface under the item of the respective camera.
After changes in the camera configuration it might be possible that the camera has to be deactivated on
the C-MOR web interface for a short time. Then activate it again.
User Manual Page 38