C-MOR GP User Manual page 32

C-MOR 6P
Left-hand text in camera image
Optional text that can be displayed in the camera image left-hand side. Is the text field left empty,
no text will be displayed in the image.
Activate/deactivate double size image text
The text in the camera image can be displayed at double size. Depending on application and
image size this parameter offers a better display.
Quality of web camera image in percentage (setting of performance)
Image quality in percentage for the transfer of the camera image to C-MOR. Standard value is
50%. Changing this parameter has great influence on the system load and may overload C-MOR
and lead to malfunctions.
Time between two events
Time in seconds when no motion is taking place and from when when a new recording is started.
Bit rate
The bit rate factor defines the bandwidth that images will be transferred from the camera to C-
MOR. The lowest value 2 is the fastest. In case the size of the camera image is very high, the bit
rate has to be increased. Otherwise the volume of the data might get too big for the creation of
new videos and recordings cannot be effected. At the same time a high value decreases the
image quality.
Necessary number of images for motion detection
This value defines how many images have to be changed one after the other so that motion can
be detected. In most of the cases the value 1 is ideal for the comparison of an image.
Light incidence
Sudden light incidence leads to motion detection of non-existent motion. By defining this value
the percentage set defines how high the number of images is that has to be ignored in case of
sudden exposure to light, in order to prevent motion detection recording.
User Manual Page 32