C-MOR GP User Manual page 36

C-MOR 6P
This list was created in June 2008 and shows just a small selection. The complete list including many
more models can be viewed under www.c-mor.us. In case you cannot find your model in the list you can
request the support of your model either by email or telephone, we will then give you all the details you
need.
In case your camera is not listed but supported it can easily be connected under the item
"Manual Path" in C-MOR. Just enter the directory of the URL of the camera's live image or
the camera's MJPEG live stream, such as e.g.
/axis-cgi/jpg/image.cgi?resolution=640x480
After that single camera options such as image rotation or maximum recording time can be defined. The
description of each setting can be found next to the respective option in the table.
On the same configuration page you are able to plan time-controlled recordings. Please click time and
day when you would like to start the video surveillance.
"Time Controlled Recording During Motion Detection"
Please carry out the settings in the table below for
just as described above.
Recordings can be started by external events (door switches, ultrasonic motion detectors, bell switches
and many more). This requires a network switch, like e.g. Barionet or other Syslog-IP switches, to send a
system message to C-MOR. The message has to be in accordance with the line defined in this section,
which will then trigger the recording.
User Manual Page 36