Rapid Guide To Use - Cellular Line interphone User Manual

Rapid guide to use

ONE BIKE AND ONE PHONE
If you have not already done it, pair the phone to the INTERPHONE
- with the device off, press the multifunctional button (1) for approx. 5
seconds.
When you hear the second sound, release the button; the LED (2)
will begin to flash from red to blue.
- take the phone to be paired, access the connections menu, enable
the Bluetooth function and search for devices.
- select STMOTO and confirm.
- when the phone asks for a password, enter 0000 (4 zeros) and press OK.
- the LED (2) of the device will turn blue.
IMPORTANT: Some phones do not connect directly after having
entered the 0000 code. In this case, press the multifunctional button
and the device will emit a confirmation sound OR access the Bluetooth
menu of the phone once more and select STMOTO from the list of
devices. Press OPTIONS and then connect.
TWO BIKES OR BIKE AND PASSENGER
Set the two INTERPHONEs to pairing mode.
- press and hold down the multifunctional button (1) for approx. 5 seconds.
- when you hear the second confirmation sound, release the button.
The LED (2) will begin to flash from red to blue.
- when the two INTERPHONEs are in pairing mode, press and hold
down the Volume + button (3) for one of the two devices (Bike 1); after
approx. 5 seconds you will hear 4 repeated sounds and the LED (2),
will go out. Release the button.
- turn the device on again by pressing the multifunctional button (1) of
Bike 1.
- press and hold down the Volume – button (4) of the second device
(Bike 2). After approx. 5 seconds you will hear 4 repeated sounds and
the LED (2) of the first device (Bike 1) will go out. Release the button.
- turn on device one (Bike 1) once again by pressing the multifunction-
al button (1), wait 5 seconds before doing anything else.
The two INTERPHONEs are ready for use.
To communicate between the two devices, press the multifunctional
button (1) of one of the two INTERPHONEs for a couple of seconds.
With the second sound, release the button and the LED (2) of the two
devices will illuminate blue and flash quickly. The other user will hear
a call sound to confirm that the interphone is functioning.
To end the conversation, briefly press the multifunctional button (1) of
one of the two devices. A sound will signal that communication has
ended.
INTERPHONE
GB
27