Special Functions - Cellular Line interphone User Manual

ANSWERING/REJECTING A CALL
1. If the device VOX function is enabled, just say one word within ten
seconds (for example, HELLO). If no sound is emitted within this
time, the call will be automatically rejected.
If the VOX function is not enabled, press the multifunctional button
to answer. (1).
2. To end the call, press the multifunctional button (1), you will hear a
confirmation sound.
VOICE ACTIVATED DIALLING
IMPORTANT: Before using this function, you must have registered the
names to call on your mobile phone. Consult the instruction manual of
your phone on how to do this.
1. For voice activated dialling, press the multifunctional button (1) for
1 second, you will hear a confirmation sound.
2. Depending on the phone used, you may hear a sound or a voice ask-
ing you to say the name to be dialled.
3. Say one of the names stored in your phone book. See your mobile
phone instruction booklet on how to store contacts vocally (voice
functions).
Special Functions –
setting depends mainly on the type of helmet you intend to use.
Variations in the interior padding and the ergonomic shape of the hel-
met mean that the distance between the headset (7) and the ear may
vary greatly. The HIGH or LOW volume setting compensates for this
difference.
ACTIVATING THE HIGH VOLUME
If the headset (7) is very far from the ear, this function can be enabled to
increase the basic level and make the audio clear and understandable.
METHOD
1. When the device is off (LED 2 off) press and hold down the Volume
+ button (3).
2. While holding down button (3), press the multifunctional button (1)
for five seconds.
3. You will hear a sound that means the device is on and the LED (2)
will flash blue, after about 5 seconds you will hear another confir-
mation sound and the LED (2) will flash red/blue to confirm the
HIGH VOLUME setting.
4. Release the buttons.
HIGH/LOW volume: the high or low volume
INTERPHONE
GB
23