Table of Contents
Advertisement
INTERPHONE
GB
USE OF THE INTERPHONE AND/OR MOBILE PHONE
If you want to use the INTERPHONE in both interphone and mobile
phone mode, use the following functions:
- to change from mobile phone to interphone, press and hold down the
multifunctional button (1)
(this function is available only for devices set as for Bike 1)
- to change from interphone to phone, press the multifunctional but-
ton briefly (1)
(this function is available only for devices set as for Bike 1)
IMPORTANT
1. Both INTERPHONE devices must be set in interphone mode.
2. When in interphone mode, the sound of a call on the mobile phone
cannot be transferred to the headset. To avoid losing the call, set the
mobile phone ring to vibration or vibration and ring tone mode.
3. To receive a call, some mobiles phones need the multifunctional
button (1) to be pressed twice. One press is to transfer the call to the
headset and the second is to answer.
4. When using the device in interphone mode with two kits, only one
phone can be used (remember to set the mobile phone ring to vibra-
tion or vibration and ring tone mode).
NOTE: when used alone (one INTERPHONE and one phone ), the
incoming call function will be sent normally to the headset, therefore
there is no need for the vibration mode of the phone to be activated.
Multiple pairing and switchover to several phones
INTERPHONE can store and connect 5 Bluetooth phones. If you then
want to add another mobile phone, the device will automatically elim-
inate the phone that has not been used for the most time.
No more than one phone can be used at any one time. The device will
keep the 5 phones in its memory, but only one can be used at a time.
It is very simple to move from using one phone to another. The opera-
tions are carried out directly on the phones used:
- to disconnect the phone - access the Bluetooth menu and disconnect it
- to connect the other phone - access the paired device menu, choose
ST MOTO and press connect.
26
Hide quick links:
Advertisement
Table of Contents
