Sony SAL100M28 Service Manual page 25

HELP13
Adhesive bond (B-10): J-6082-612-A
After the brush position adjustment is completed, tighten the two screws and apply the adhesive bond (B-10) to them as shown in the
figure.
HELP14
Adhesive bond (B-10): J-6082-612-A
After the brush position adjustment is completed, apply the adhesive bond (B-10) to the two screws as shown in the figure.
HELP15
Grease (G-35):
Adhesive bond (B-40): J-6082-614-A
1. Apply the grease (G-35) to the instruction part of the gear base plate block.
2. Attach the gear base plate block, and apply the adhesive bond (B-40) to the two screws and tighten them as shown in the figure.
Gear Base Plate Block
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
Apply the
adhesive
bond (B-10)
Apply the
adhesive
bond (B-10)
J-6082-621-A
Apply the adhesive bond (B-40)
Apply the
grease (G-35)
HELP