Sony SAL100M28 Service Manual page 27

HELP18
Adhesive bond (B-10):
Universal Wrench:
Chip-A For Universal Wrench: J-6082-609-1
Chip-B For Universal Wrench: J-6082-609-2
Apply the adhesive bond (B-10) to the instruction part of the torque ring holder, it tightens with a universal wrench.
20 mm
HELP19
Grease (G-85):
Adhesive bond (B-40): J-6082-614-A
1. Apply the grease (G-85) to the instruction part as shown in the figure.
2. Attach the focus range switch knob, and apply the adhesive bond (B-40) to the screw and tighten it as shown in the figure.
Focus Range Switch Knob
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
J-6082-612-A
J-6082-609-A
Apply the
adhesive
bond (B-10)
J-6082-626-A
Apply the
adhesive bond (B-40)
Apply the grease (G-85) (All circumference)
Click Base
Steel Ball
Focus Range Stopper
Focus Range Switch Knob
HELP