Download  Print this page

Brush Position Check; Adjustment And Pattern Check - Sony SAL100M28 Service Manual

(macro 2.8/100) (100mm f2.8 macro)
Hide thumbs

Advertisement

4-7.
BRUSH POSITION CHECK/ADJUSTMENT AND PATTERN CHECK
Note:
If dialog box of error code appears during the checking or adjustment, check the reason of error referring to page 4-19.

4-7-1. Brush Position Check

Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Lens Adjustment Program
Note: Lens Adjustment Program is downloadable from the ESI homepage.
1. Preparations
1) Connect the checking lens to the camera.
2) Start the lens adjustment program "LensAdjustment.exe" referring to "4-1-2. Lens Adjustment Program".
Fig. 4-7-1
2. Checking Method
[Connect]
1) Click the
button on the lens adjustment program.
[End]
Note:
Click the
Fig. 4-7-2
2) Check that the "Type" is set to "1", and click the
3) Set the focus position to infinity end, then check that the OK (Green) indicator of "Position" lights as shown in Fig. 4-7-3.
Fig. 4-7-3
If the NG (Red) indicator of "Position" lights, perform the "4-7-2. Brush Position Adjustment and Pattern Check".
Fig. 4-7-4
[Exit]
4) Click the
button.
[End]
5) Click the
button to terminate the lens adjustment program.
6) Turn the POWER switch of the camera to OFF.
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
button to disconnect the USB connection, then lens adjustment program will terminate.
[Focus]
button on the lens adjustment program.
4-16

Advertisement

loading

  Related Manuals for Sony SAL100M28