Sony SAL100M28 Service Manual page 29

HELP21
Adhesive bond (B-10): J-6082-612-A
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Don't use what becomes white after drying like a quick-drying glue.
1. Attach the click plate, and apply the adhesive bond (B-10) to the instruction part as shown in the figure.
2. Attach the dust proofing tape as shown in the figure.
3. Apply the adhesive bond (LOCTITE 460) to the instruction part as shown in the figure, and attach the FH button base.
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
Dust Proofing
Tape
Dust Proofing Tape
Washer
Screw
Apply the
adhesive
bond (B-10)
FH Button Base
Apply the
adhesive
bond
(LOCTITE 460)
Apply the
adhesive
bond
(LOCTITE 460)
HELP