Playback; Basic Playback; Playback Features - JVC HR-V210E Specifications

Playback

Basic Playback

Turn on the TV and select the video channel or AV mode.
A
Load a cassette
Make sure the window side is
up, the rear label side is facing
you and the arrow on the front of
the cassette is pointing towards
the recorder.
Do not apply too much pressure when inserting.
The recorder turns on, and the counter is reset, automatically.
If the cassette's record safety tab has been removed, playback
begins automatically.
B
Start playback
Press 4.
During playback
Stop playback
Press 8 on the remote
control.
Pause playback and view still picture
Press 9.
Press 4 to resume normal playback.
If there is vertical jitter, press PR r/t on the remote control or
PR+/– on the recorder to correct the picture.
Pause and Frame-by-Frame playback
Press 9 to pause, then press e or 9 repeatedly.
Press 4 to resume normal playback.
Picture Search
Press 3 or 5. Press 3 or 5 again to perform high-
speed search.
Each time you press 3 or 5, the search speed changes
between low-speed and high-speed.
Press 4 to resume normal playback.
Variable Speed Search (including slow-motion)
Press w or e repeatedly.
Press 4 to resume normal playback.
Each time you press w or e, the playback speed changes. To
decrease the speed during picture search, press the opposite
direction button repeatedly.
During still picture, press and hold e to start forward slow
motion playback. When you release the button, still picture
resumes. During still picture, holding 9 for more than
2 seconds also starts forward slow motion playback. If you
press 9 again, still picture resumes.
During slow motion playback, some noise may appear on the
TV screen. Press PR r/t on the remote control or PR+/– on
the recorder to eliminate the noise.
Reverse
Reverse
Reverse
search
play
3 steps
OR Press 0 on the recorder.
Slow Forward
Normal
motion
play
1 step 4 steps
When the tape is not running
Rewind/fast-forward
Press 3 or 5.
Eject the cassette
Press 0.
You can also eject the cassette when the recorder is turned off.
Turn off the recorder
Press 1.
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback
mode,
the picture will be distorted
the noise bars will appear

Playback Features

Adjusting tracking condition
Automatic tracking adjustment
When a new cassette is loaded, the recorder enters the automatic
tracking mode.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, adjust the tracking manually.
On the remote control:
A
Press p to activate manual tracking.
B
Press PR r or t to eliminate the noises. Press it briefly for a
fine adjustment, or press and hold for a coarse adjustment.
Press p again to reactivate automatic tracking.
Automatic operations after rewinding
— Next Function Memory
The Next Function Memory "tells" the recorder what to do after
rewinding. Ensure that the recorder is in stop mode.
For Automatic Playback Start
Press 3, then press 4 within 2 seconds.
For Automatic Power Off
Press 3, then press 1 within 2 seconds.
For Automatic Timer Standby
Press 3, then press # within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer Standby function if
the cassette's record safety tab is removed.
Forward
search
— 7 —